 |
Machine Model:20-60T Excavator
Part Name:Mine Excavator Rock Bucket
Bucket capacity: 0.09-5m³
Bucket Width:600-3000mm
Weight:300-5000kg
| Quantity: | |
|---|---|
Skeleton buckets
SINOCTM
Skeleton Bucket | ||||
Model | Carrier Size | Width(mm) | Capacity(m3) | Weight(kgs) |
RSSB-05 | 1-4t | 1000 | 0.1 | 72 |
RSSB-10 | 2-6t | 1000 | 0.2 | 125 |
1200 | 0.24 | 172 | ||
1500 | 0.3 | 263 | ||
RSSB-20 | 7-11t | 1500 | 0.45 | 360 |
1750 | 0.6 | 410 | ||
RSSB-30 | 12-15t | 1800 | 0.8 | 539 |
RSSB-40 | 16-19t | 2000 | 1 | 610 |
RSSB-50 | 20-26t | 2000 | 1.2 | 1065 |
RSSB-60 | 27-40t | 2400 | 1.6 | 1400 |
Skeleton buckets are trusted for productivity and reliability. Our Skeleton bucket is engineered to be one of the most durable offerings on the market - increasing productivity by simplifying on-site material sorting. Following are Features and Benefits :
• NM400 ribs - available in custom spacing
• Durable NM400 plate steel lip for reliability
• Cast wing shrouds for optimum wear protection
• Lip and beam gussets provide strength in high stress areas
• 4 piece side protection
Skeleton Bucket was made for primary selection of materials of various types, for land reclamation and for pre-selecting materials after demolition. The "gaps" in the grille are determined to suit the dimensions of the product to be selected. Ransun Skeleton Bucket use thick, high tensile round bar recessed deep into the torsion beam, lip, and cross bracings. This innovative design is far stronger, sifts material faster.
• Optional bucket profile as GP Bucket or Ditch Cleaning Bucket
• With ribs that allow for separating dirt from rocks
Packaging Details: International standard pallet or wood case.
1. one 20GP can load about 12-14 pieces 1.0m3 or 1.2m3 buckets for 20ton excavator(Width less than 42
inches )
2. one 40HC can load about 26-28 pieces 1.0m3 or 1.2m3 buckets for 20ton excavator;
3. one 20GP can load about 8 pieces 1.6m3 buckets for 30ton excavator;
4. one 40HC can load about 16 pieces 1.6m3 buckets for 30ton excavator.
